FSC C+/C Sanded 1 Side Brazilian Pine Plywood
Manufactured from a single specie of Pine. The board is normally manufactured with an odd number of plies, each ply being oriented at 90 degrees to those bonded to it, to create a balanced construction. The face and reverse veneers are almost always oriented in the direction of the longest dimension.
If you are to cut the MDF or Ply yourself, we would always recommend a competent person cuts the panel and the correct Personal Protective Equipment (PPE) should always be worn. There harmful fibres are known to cause health issues so goggles, dust mask, ear defenders and gloves should be worn. We would recommend a respirator with a P2 Filter rating should be considered compared to a disposable dust mask. It is also recommended that any cutting is undertaken in a well-ventilated area.