- 12mm Brazilian Pine Plywood
- Plywood Cut to size in Chelmsford, Essex
- Delivery Nationwide
- Collection available from our workshop in Chelmsford, Essex
12mm FSC C+/C Sanded 1 Side Brazilian Pine Plywood.
Enter your Width and Height measurements above and we can cut your 12mm Brazilian Pine Plywood to size, Our minimum cutting size is Width 20mm and Length 50mm and there is a minimum area charge of 0.5m2. The maximum size will be dependant on the 12mm Brazilian Pine Plywood sheet size. Our online MDF cutting order form has been made to have the maximum sizes specified so there is no risk of you ordering a size that is not achievable.
Once you have selected your finish sizes you will also have the option to have your 12mm Brazilian Pine Plywood Primed White or Finished Sprayed. Please see our Spray Finish page to read about the paint we use along with our preparation procedures.
If your looking to buy a full sheet of 12mm FSC C+/C Sanded 1 Side Brazilian Pine Plywood please go to our MDF Full Boards page which can be found in the Menu.
Our minimum lead times are:
MDF Cut To Size: 5-10 Working Days.
MDF Spray Finishing: 10-15 Working Days.
Manufactured from a single specie of Pine. The board is normally manufactured with an odd number of
plies, each ply being oriented at 90 degrees to those bonded to it, to create a balanced construction. The face
and reverse veneers are almost always oriented in the direction of the longest dimension.
If you are to cut the MDF or Ply yourself, we would always recommend a competent person cuts the panel and the correct Personal Protective Equipment (PPE) should always be worn. There harmful fibres are known to cause health issues so goggles, dust mask, ear defenders and gloves should be worn. We would recommend a respirator with a P2 Filter rating should be considered compared to a disposable dust mask. It is also recommended that any cutting is undertaken in a well-ventilated area.