8mm Light Winchester Oak

£23.38 inc. VAT per m2

Out of stock

8mm Light Winchester Oak Melamine Faced Chipboard H3382 ST9 Egger FSC

Enter your Width and Height measurements above, and we can cut your 8mm Light Winchester Oak Melamine Faced Chipboard to size, Our minimum cutting size is Width 20mm and Length 50mm, there is a minimum area charge of 0.3m2. The maximum size will be dependant on the 8mm Light Winchester Oak Melamine Faced Chipboard sheet size. Our online MDF cutting order form has been made to have the maximum dimensions specified, so there is no risk of you ordering a panel size that is not achievable.

Once you have selected your finish dimensions, you will also have the option to have your 8mm Light Winchester Oak Melamine Faced Chipboard edged with matching pre-glued edging.

If you are looking to buy a full sheet of 8mm Light Winchester Oak Melamine Faced Chipboard H3382 ST9 Egger FSC, please see our MDF Full Board section.

Our minimum lead times are:
MDF Cut To Size: 5-10 Working Days.
MDF Spray Finishing: 10-15 Working Days.

Safety
If you are to cut the Melamine faced chipboard yourself, we would always recommend a competent person cuts the panel, and the correct Personal Protective Equipment (PPE) should always be worn. Their harmful fibres are known to cause health issues so goggles, dust mask, ear defenders and gloves should be worn. We would recommend a respirator with a P2 Filter rating should be considered compared to a disposable dust mask. It is also recommended that any cutting is undertaken in a well-ventilated area.

Additional information

Weight 34 kg
Dimensions 2800 × 2070 × 8 mm
Board Thickness (mm)

Finish

Oak

You may also like…

Menu