18mm Light Winchester Oak Melamine Faced Chipboard H3382 ST9 Egger FSC
Enter your Width and Height measurements above and we can cut your 18mm Light Winchester Oak Melamine Faced Chipboard to size, Our minimum cutting size is Width 20mm and Length 50mm and there is a minimum area charge of 0.3m2. The maximum size will be dependant on the 18mm Light Winchester Oak Melamine Faced Chipboard sheet size. Our online MDF cutting order form has been made to have the maximum sizes specified so there is no risk of you ordering a size that is not achievable.
Once you have selected your finish sizes you will also have the option to have your 18mm Light Winchester Oak Melamine Faced Chipboard edged with matching pre-glued edging.
If your looking to buy a full sheet of 18mm Light Winchester Oak Melamine Faced Chipboard H3382 ST9 Egger FSC. please go to our MDF Full Boards page which can be found in the Menu.
Our minimum lead times are:
MDF Cut To Size: 5-10 Working Days.
MDF Spray Finishing: 10-15 Working Days.
If you are to cut the Melamine faced chipboard yourself, we would always recommend a competent person cuts the panel and the correct Personal Protective Equipment (PPE) should always be worn. There harmful fibres are known to cause health issues so goggles, dust mask, ear defenders and gloves should be worn. We would recommend a respirator with a P2 Filter rating should be considered compared to a disposable dust mask. It is also recommended that any cutting is undertaken in a well-ventilated area.