- 12mm Medite Moisture Resistant MDF
- MDF Cut to size in Chelmsford, Essex
- Delivery Nationwide
- Collection available from our workshop in Chelmsford, Essex
12mm Medite Moisture Resistant Medium Density Fibreboard (MDF)
Enter your Width and Height measurements above and we can cut your 12mm Moisture Resistant MDF to size, Our minimum cutting size is Width 20mm and Length 50mm and there is a minimum area charge of 0.5m2. The maximum size will be dependant on the 12mm Moisture Resistant MDF sheet size. Our online MDF cutting order form has been made to have the maximum sizes specified so there is no risk of you ordering a size that is not achievable.
Once you have selected your finish sizes you will also have the option to have your 12mm Moisture Resistant MDF Primed White or Finished Sprayed. Please see our Spray Finish page to read about the paint we use along with our preparation procedures.
If your looking to buy a full sheet of 12mm Moisture Resistant MDF please go to our MDF Full Boards page which can be found in the Menu.
Our minimum lead times are:
MDF Cut To Size: 5-10 Working Days.
MDF Spray Finishing: 10-15 Working Days.
MDF (Medium Density Fibre) board is a commonly used particle board. Moisture Resistant MDF is used in places with high humidity levels. In comparison to standard MDF, Moisture Resistant MDF (or MR MDF) contains a MEDITE MR is a moisture resistant MDF panel designed for use in humid conditions in accordance with MDF.H (Option 1) as defined in EN 622-5 so is ideal for applications such as kitchen and bathroom furniture, window and skirting boards and architectural mouldings.
Ideal For Humid Conditions
Consistently Smooth Surface
If you are to cut the MDF or Ply yourself, we would always recommend a competent person cuts the panel and the correct Personal Protective Equipment (PPE) should always be worn. There harmful fibres are known to cause health issues so goggles, dust mask, ear defenders and gloves should be worn. We would recommend a respirator with a P2 Filter rating should be considered compared to a disposable dust mask. It is also recommended that any cutting is undertaken in a well-ventilated area.
Please be sure to refer to Medite technical sheets for full specification and the correct procedures of using this material.