- 6mm Medite Exterior MDF
- MDF Cut to size in Chelmsford, Essex
- Delivery Nationwide
- Collection available from our workshop in Chelmsford, Essex
6mm Medite Exterior Medium Density Fibreboard (MDF)
Enter your Width and Height measurements above and we can cut your 6mm Exterior MDF to size, Our minimum cutting size is Width 20mm and Length 50mm and there is a minimum area charge of 0.5m2. The maximum size will be dependant on the 6mm Exterior MDF sheet size. Our online MDF cutting order form has been made to have the maximum sizes specified so there is no risk of you ordering a size that is not achievable.
Once you have selected your finish sizes you will also have the option to have your 6mm Exterior MDF Primed White or Finished Sprayed. Please see our Spray Finish page to read about the paint we use along with our preparation procedures.
If your looking to buy a full sheet of 6mm Exterior MDF please go to our MDF Full Boards page which can be found in the Menu.
Our minimum lead times are:
MDF Cut To Size: 5-10 Working Days.
MDF Spray Finishing: 10-15 Working Days.
MEDITE EXTERIOR is an MDF panel developed specifically for use in a wide range of external applications in accordance with MDF-H2 as defined in EN 622 part 5 and gives all the design freedom of interior MDF.
HOW EXTERIOR IS MEDITE EXTERIOR?
All wood and wood-based products react to moisture and Medite Exterior is no exception. Wood cells expand and shrink slightly in width and length as they absorb or lose moisture. This phenomenon is
not fully reversible, as relieved stresses do not completely recover. Moisture changes in wood may arise from sustained changes in relative humidity, immersion or lodgement of water, any or all of
which lead to absorption by capillary action. If the moisture change is not uniformly distributed in the wood, relatively strong stresses can develop which will affect the wood’s physical properties. For
example, these stress imbalances can twist construction lumber and warp panel products such as plywood and Medite Exterior.
The specially formulated polyurethane resin, together with the patented manufacturing process used in the production of Medite Exterior, increases the physical properties of MDF to create a premium
composite panel for demanding conditions. Medite Exterior has undergone accelerated weathering tests as per British Standard 3900 F3.
If you are to cut the MDF or Ply yourself, we would always recommend a competent person cuts the panel and the correct Personal Protective Equipment (PPE) should always be worn. There harmful fibres are known to cause health issues so goggles, dust mask, ear defenders and gloves should be worn. We would recommend a respirator with a P2 Filter rating should be considered compared to a disposable dust mask. It is also recommended that any cutting is undertaken in a well-ventilated area.
Please be sure to refer to Medite technical sheets for full specification and the correct procedures of using this material.